3D marking and engraving

LASERIX-3D

One machine to engrave everything.

Dual source as standard: MOPA fiber 60 W and UV 5 W. 3-axis head, work volume 600 × 600 × 200 mm. Designed and manufactured in France.

2 sourcesMOPA 60 W + UV 5 W
600 × 600 × 200 mmWork volume, parts up to 100 kg
Electric doorOpening or closing < 2 seconds

SAFE

Door closed, class 1.

Enclosed cabinet, electrically interlocked safety door. Opening or closing in under 2 seconds. Front control panel, indicator lights and emergency stop within reach.

DUAL SOURCE

MOPA 60 W and UV 5 W.

Both sources are integrated as standard. Switch operating modes without changing machines: deep engraving on metals on one side, cold marking on the other.

3 AXES

The head moves to the part.

Marking head mounted on X, Y and Z. Live autofocus: place the part and the head positions to focal distance. Smart-Vision camera for viewing, realigning and reading.

WORKSHOP

One machine, two sources, one usable volume.

Work volume 600 × 600 × 200 mm. Footprint 1 230 × 1 405 mm. Parts up to 100 kg.

The head travels on three linear axes. It reaches zones of an irregular part without needing to reposition everything. Also available in single-source version.

LASERIX-3D head on linear axes, lens and Smart-Vision camera

1 MACHINE, 2 SOURCES

MOPA for engraving.
UV to preserve.

FIBER MOPA 1 064 NM

MOPA source 60 W

Ytterbium-doped fiber. Pulse duration is adjustable, down to 1 ns. Deep engraving, thermal and photochemical contrasts, short cycle times.

Metals and some plastics
Short pulses down to 1 ns
60 W for depth and throughput

Learn more about the MOPA fiber laser

UV 355 NM

UV source 5 W

Cold marking with almost no heating. Finer spot than infrared (beam diameter < 5 µm). The coating remains, and so does the contrast.

Glass, plastics, metals, wood, paper, cardboard, leather
Marking for sensitive materials
Spot fineness < 5 µm

Learn more about the 355 nm UV laser

SMART-VISION

See, realign, verify the code.

A Smart-Vision camera is integrated into the head. Live view of the marking, preview of the pattern on the part, Live autofocus.

1D or 2D code verification immediately after marking. Optional automatic realignment, even if the part isn’t always in the same position.

SMART-3D

The focal plane follows the part, without mechanical stages.

Smart-3D lens option. A 10 mm focal shift is completed in under 1 ms. Import a 3D file: the laser follows the profile.

Focal distance range up to ± 80 mm
Scan speed up to 15 m/s
Unit calibration, 121 points, at the factory

FIXTURING

Custom table, chuck and tailstock.

The main table is manufactured to the specification: chuck area, perforated table, recessed basket fittings, tapped holes as required.

Motorized rotary chuck, controlled by the laser system. Tailstock for long parts. Laser measurement of tailstock position to 70 µm, useful for repeatable graduations.

Rotary chuck, tailstock and laser head above a cylindrical part

CONTROL

Buttons for the shop floor, SAMLight for the job.

Front panel for quick actions. LCD for masks, alarms and camera view. Operator interface limited to production functions.

SAMLight (SCAPS) software in French: vectors, DataMatrix, QR, serialization, ERP / MES / CSV connectivity. Smart-3D lens management. Remote maintenance and self-diagnostics.

LASERIX-3D control panel, green indicator, Start, shutter and emergency stop buttons

INTEGRATED FILTRATION

The Donaldson-BOFA extractor
AD Oracle iQ

AD Oracle iQ. Integrated air treatment, controlled by LASERIX-3D.

Compact unit, quiet operation. Triple filtration: prefilter, HEPA H14, activated carbon. The extractor is fully controlled by the machine.

Learn more about industrial filtration

Triple filtration: pre-filter, HEPA H14 filter and activated carbon filter.

PROJECT

Schedule an appointment to see the machine.

A single NWS Laser contact handles the material, the usable source and the fixturing: table, chuck or Smart-3D.

APPLICATIONS

What LASERIX-3D
already marks in the workshop.

Laser graduation on a metal part, reading 0 to 40

Repeatable graduations

Chuck, tailstock and laser measurement to 70 µm: scales remain aligned from one part to the next.

Cylindrical part held in the chuck under the laser head

Rotational parts

Marking around the axis without re-clamping. Useful in general machining, tooling, aerospace.

MOPA fiber

Identification plates, general machining, aerospace, medical.

UV 355 nm

Luxury, surgical tools, precision mechanics, glassware, watchmaking.