CO₂ cutting
CUT-X
CO₂ laser cutting and engraving of wood, acrylic and organic materials.
- 600, 900 or 1 300 mmThe table follows the part
- 60 to 150 WCO₂ tube according to format
- Integrated filtrationDonaldson-BOFA AD 350 to 1500 iQ
SAFE
Enclosed machine, ready to produce.
Enclosed cabinet, door safety and extractor sized to the format. The machine arrives assembled, ready to engrave and cut in the workshop.
SIMPLE
Choose the table, then the power.
Three sizes — 600, 900 and 1 300 — according to the part. Power and options (Live Focus, part height) are then selected to match the need.
CLEAN
Fumes are contained within the machine.
Table-level capture and Donaldson-BOFA extractor adapted to the format: AD 350, 1000 iQ or 1500 iQ.
WORKSHOP
Cut and engrave without changing machines.
CUT-X brings together CO₂ tables intended for wood, acrylic, cardboard, leather, textiles and non-metallic plastics. From one-off parts to small workshop series, the same station engraves and cuts.
FORMATS
CUT-X 600, 900 and 1300.
The table matched to the part.
| Model | Area | Power |
|---|---|---|
| CUT-X 600 | 600 × 400 mm | 60 or 80 W |
| CUT-X 900 | Live Focus, up to 600 mm/s | 80 or 100 W |
| CUT-X 1300 | Workpiece height up to 400 mm | 130 or 150 W |
Slat or honeycomb tables depending on material. Powers and options are confirmed after assessment.
Live Focus
Throughput and Live Focus
On the CUT-X 900, Live Focus follows the part profile. The 600 and 1300 formats cover compact shop use and large parts without changing software or operator actions.
INTEGRATED FILTRATION
The smoke and fine particle extractor
AD 350, 1000 iQ or 1500 iQ
Depends on the CUT-X format. Flow matches the table.
NWS Laser sizes the Donaldson-BOFA extractor to match format and material: AD 350 for compact models, 1000 iQ or 1500 iQ when the table and thickness require it.
Learn more about industrial filtration
Triple filtration: pre-filter, HEPA H14 filter and activated carbon filter.
Technical data
- CUT-X 600
- AD 350
- CUT-X 900
- AD 1000 iQ
- CUT-X 1300
- AD 1500 iQ
PROJECT
Schedule an appointment to see the machine.
A single NWS Laser contact will review material, format and power.
APPLICATIONS
What the CUT-X
already cuts in the workshop.
Interior fit-out and wood
Panels, mock-ups, signage and joinery components.
Plexiglass and plastics
PMMA, PET, non-metallic plastics, clean edges.
Flexible materials
Cardboard, leather, textiles and flexible materials.
Secure workstation
Enclosed workstation for engraving and cutting without changing machines.